Cisco 300-510 Dumps PDF

Master Your Preparation for the Cisco 300-510

We give our customers with the finest 300-510 preparation material available in the form of pdf .Cisco 300-510 exam questions answers are carefully analyzed and crafted with the latest exam patterns by our experts. This steadfast commitment to excellence has built unbreakable trust among countless people who aspire to advance their careers. Our learning resources are designed to help our students attain an impressive score of over 97% in the Cisco 300-510 exam, thanks to our effective study materials. We appreciate your time and investments, ensuring you receive the best resources. Rest assured, we leave no room for error, committed to excellence.

Friendly Support Available 24/7:

If you face issues with our Cisco 300-510 Exam dumps, our customer support specialists are ready to assist you promptly. Your success is our priority, we believe in quality and our customers are our 1st priority. Our team is available 24/7 to offer guidance and support for your Cisco 300-510 exam preparation. Feel free to reach out with any questions if you find any difficulty or confusion. We are committed to ensuring you have the necessary study materials to excel.

Verified and approved Dumps for Cisco 300-510:

Our team of IT experts delivers the most accurate and reliable 300-510 dumps for your Cisco 300-510 exam. All the study material is approved and verified by our team regarding Cisco 300-510 dumps. Our meticulously verified material, endorsed by our IT experts, ensures that you excel with distinction in the 300-510 exam. This top-tier resource, consisting of 300-510 exam questions answers, mirrors the actual exam format, facilitating effective preparation. Our committed team works tirelessly to make sure that our customers can confidently pass their exams on their first attempt, backed by the assurance that our 300-510 dumps are the best and have been thoroughly approved by our experts.

Cisco 300-510 Questions:

Embark on your certification journey with confidence as we are providing most reliable 300-510 dumps from Microsoft. Our commitment to your success comes with a 100% passing guarantee, ensuring that you successfully navigate your Cisco 300-510 exam on your initial attempt. Our dedicated team of seasoned experts has intricately designed our Cisco 300-510 dumps PDF to align seamlessly with the actual exam question answers. Trust our comprehensive 300-510 exam questions answers to be your reliable companion for acing the 300-510 certification.

Cisco 300-510 Sample Questions

Question # 1

An engineer is troubleshooting slow performance issues on a customer’s network after the last multicast configuration change was applied on it While checking the running configuration on the router the engineer notices there are many ip igmp join-group commands applied on several interfaces of the router which caused the high CPU utilization usage. What action must the engineer take to solve this issue? 

A. Configure ip igmp static-group command on all interfaces  
B. Remove ip igmp join-group command on all unnecessary interfaces  
C. Configure all router interfaces to be process-switched by increasing the query interval  
D. Remove unnecessary members from the IGMP group  

Show Answer

Question # 2

For which reason do you deploy BGP confederations within a BGP transit backbone? 

A. to support a larger number of eBGP peer sessions  
B. to increase the number of routes that can be redistributed between the running IGP and BGP 
C. to reduce the number of eBGP routes that must be shared between autonomous systems 
D. to reduce the number of iBGP peering sessions  

Show Answer

Question # 3

Explanation: Some level of load balancing is achieved by default as BGP prefers shortest AS_PATH for certain prefix (Cisco BGP path selection algorithm - rule 4) . If 1-7 rules gives no preference for certain prefix then with rule 8. Prefer lowest IGP metric to BGP next hop we can force traffic to R2 or R3 influencing load distribution.

A. commit the configuration  
B. roll back the configuration  
C. merge the configuration  
D. save the running configuration  

Show Answer

Question # 4

In a PIM-SM environment, which mechanism determines the traffic that a receiver receives?

A. The receiver explicitly requests its desired traffic from the RP on the shared tree.  
B. The receiver explicitly requests traffic from a single source, which responds by forwarding all traffic. 
C. The RP on the shared tree floods traffic out of all PIM configured interfaces.  
D. The receiver explicitly requests traffic from each desired source, which responds by sending all traffic. 

Show Answer

Question # 5

Which two differences should be considered when deciding whether to implement to implement routing policies or route maps? (Choose two.)

A. Sequences are added after implementing a route map, but routing policies must be reconfigured when change is needed.
B. Route maps are implemented using hierarchical policies, but routing policies must be implemented sequentially
C. Route maps require an explicit deny at the end of the sequence, but routing policies have an implicit deny at the end of the program.
D. Route policies require sequence numbers, but route maps are implemented without sequencing. 
E. Route maps are supported in Cisco 10S Software and routing policies are supported in Cisco IOS XR Software. 

Show Answer

Question # 6

A network operator working for a telecommunication company with an employee id: 4074:92:707 is planning to implement the Nonstop Forwarding (NSR) feature on the customer’s core network. After getting the configuration ready for NSR. on which router should the operator implement NSR changes? 

A. on the CE router  
B. on the ASBR router  
C. on the ABR router  
D. on the PE router  

Show Answer

Question # 7

A network consultant is troubleshooting IS-IS instances to identify why a routing domains is having communication problems between the two instances. Which description of the possible cause of issues in the routing domain is true?

A. The same interface cannot be advertised in two different IS-IS instances  
B. The IS-IS “ISP” and “ISP2” instances are unrelated and unable to intercommunicate  
C. The configured IS-IS NSEL value is not allowing the routing systems to establish a neighborship 
D. The interface mode ip router is-is command was not included in the script  

Show Answer

Question # 8

Which cost is the default when redistributing routes from BGP to OSPF? 

A. 20  
B. 1  
C. infinite  
D. automatic  

Show Answer

Question # 9

What can be used to determine a path from the head-end to a tail-end router when implementing SR-TE with a head-end, with little information on the network topology?

A. traffic controller  
B. path computation engine  
C. tail-end router  
D. SNMP server  

Show Answer

Question # 10

What is the role of segment routing mapping server? 

A. It advertises a local SID mapping policy to all the mapping clients.  
B. It works with IGP instances to calculate the prefix-SIDs in the absence of a mapping policy
C. It selects multiple mapping entries to create overlapping active mapping policies.  
D. It reads and translates remotely received SIDs from other mapping servers to create SID mapping entries.

Show Answer

Question # 11

A network engineer is troubleshooting OSPF multiarea. Which Cisco IOS XR feature should the engineer use in order to streamline OSPF issue? 

A. hierarchical CLI 
B. routing process enabled by default on all interfaces  
C. DR support for topology management  
D. show lp ospf topology command  

Show Answer

Question # 12

You have configured routing policies on a Cisco IOS XR device with routing policy language. Which two statements about the routing policies are true? (Choose two.)

A. The routing policies affect BGP-related routes only.  
B. If you make edits to an existing routing policy without pasting the full policy into the CLI, the previous policy is overwritten.
C. You can change an existing routing policy by editing individual statements.  
D. The routing policies are implemented in a sequential manner.  
E. The routing policies are implemented using route maps.  

Show Answer

Question # 13

Which task is performed when troubleshooting LDP? 

A. Execute the ping utility to generate information about the MAC addresses used along the path
B. Verify that MPLS is disabled globally and enabled on the necessary interfaces in a perinterface basis 
C. Execute the traceroute utility to generate information about the labels used along the path 
C. Execute the traceroute utility to generate information about the labels used along the path 

Show Answer