Cisco 300-710 Dumps

Cisco 300-710 Dumps PDF

Securing Networks with Cisco Firepower (300-710 SNCF)
  • 260 Questions & Answers
  • Update Date : June 05, 2024

PDF + Testing Engine
$65
Testing Engine (only)
$55
PDF (only)
$45
Free Sample Questions

Master Your Preparation for the Cisco 300-710

We give our customers with the finest 300-710 preparation material available in the form of pdf .Cisco 300-710 exam questions answers are carefully analyzed and crafted with the latest exam patterns by our experts. This steadfast commitment to excellence has built unbreakable trust among countless people who aspire to advance their careers. Our learning resources are designed to help our students attain an impressive score of over 97% in the Cisco 300-710 exam, thanks to our effective study materials. We appreciate your time and investments, ensuring you receive the best resources. Rest assured, we leave no room for error, committed to excellence.

Friendly Support Available 24/7:

If you face issues with our Cisco 300-710 Exam dumps, our customer support specialists are ready to assist you promptly. Your success is our priority, we believe in quality and our customers are our 1st priority. Our team is available 24/7 to offer guidance and support for your Cisco 300-710 exam preparation. Feel free to reach out with any questions if you find any difficulty or confusion. We are committed to ensuring you have the necessary study materials to excel.

Verified and approved Dumps for Cisco 300-710:

Our team of IT experts delivers the most accurate and reliable 300-710 dumps for your Cisco 300-710 exam. All the study material is approved and verified by our team regarding Cisco 300-710 dumps. Our meticulously verified material, endorsed by our IT experts, ensures that you excel with distinction in the 300-710 exam. This top-tier resource, consisting of 300-710 exam questions answers, mirrors the actual exam format, facilitating effective preparation. Our committed team works tirelessly to make sure that our customers can confidently pass their exams on their first attempt, backed by the assurance that our 300-710 dumps are the best and have been thoroughly approved by our experts.

Cisco 300-710 Questions:

Embark on your certification journey with confidence as we are providing most reliable 300-710 dumps from Microsoft. Our commitment to your success comes with a 100% passing guarantee, ensuring that you successfully navigate your Cisco 300-710 exam on your initial attempt. Our dedicated team of seasoned experts has intricately designed our Cisco 300-710 dumps PDF to align seamlessly with the actual exam question answers. Trust our comprehensive 300-710 exam questions answers to be your reliable companion for acing the 300-710 certification.

Related Exams


Cisco 300-710 Sample Questions

Question # 1

A security engineer needs to configure a network discovery policy on a Cisco FMC appliance and prevent excessive network discovery events from overloading the FMC database? Which action must be taken to accomplish this task?

A. Change the network discovery method to TCP/SYN. 
B. Configure NetFlow exporters for monitored networks. 
C. Monitor only the default IPv4 and IPv6 network ranges. 
D. Exclude load balancers and NAT devices in the policy. 



Question # 2

Which action must be taken on the Cisco FMC when a packet bypass is configured in case the Snort engine is down or a packet takes too long to process? 

A. Enable Inspect Local Router Traffic 
B. Enable Automatic Application Bypass 
C. Configure Fastpath rules to bypass inspection 
D. Add a Bypass Threshold policy for failures 



Question # 3

An engineer must deploy a Cisco FTD appliance via Cisco FMC to span a network segment to detect malware and threats. When setting the Cisco FTD interface mode, which sequence of actions meets this requirement?

A. Set to passive, and configure an access control policy with an intrusion policy and a file policy defined 
B. Set to passive, and configure an access control policy with a prefilter policy defined 
C. Set to none, and configure an access control policy with a prefilter policy defined 
D. Set to none, and configure an access control policy with an intrusion policy and a file policy defined 



Question # 4

A security engineer is adding three Cisco FTD devices to a Cisco FMC. Two of the devices have successfully registered to the Cisco FMC. The device that is unable to register is located behind a router that translates all outbound traffic to the router's WAN IP address. Which two steps are required for this device to register to the Cisco FMC? (Choose two.)

A. Reconfigure the Cisco FMC lo use the device's private IP address instead of the WAN address. 
B. Configure a NAT ID on both the Cisco FMC and the device. 
C. Add the port number being used for PAT on the router to the device's IP address in the Cisco FMC. 
D. Reconfigure the Cisco FMC to use the device's hostname instead of IP address. 
E. Remove the IP address defined for the device in the Cisco FMC. 



Question # 5

A security engineer is adding three Cisco FTD devices to a Cisco FMC. Two of the devices have successfully registered to the Cisco FMC. The device that is unable to register is located behind a router that translates all outbound traffic to the router's WAN IP address. Which two steps are required for this device to register to the Cisco FMC? (Choose two.) 

A. Reconfigure the Cisco FMC lo use the device's private IP address instead of the WAN address. 
B. Configure a NAT ID on both the Cisco FMC and the device. 
C. Add the port number being used for PAT on the router to the device's IP address in the Cisco FMC. 
D. Reconfigure the Cisco FMC to use the device's hostname instead of IP address. 
E. Remove the IP address defined for the device in the Cisco FMC. 



Question # 6

An engineer is configuring multiple Cisco FTD appliances (or use in the network. Which rule must the engineer follow while defining interface objects in Cisco FMC for use with interfaces across multiple devices?

A. An interface cannot belong to a security zone and an interface group 
B. Interface groups can contain multiple interface types 
C. Interface groups can contain interfaces from many devices. 
D. Two security zones can contain the same interface



Question # 7

An engineer needs to configure remote storage on Cisco FMC. Configuration backups must be available from a secure location on the network for disaster recovery. Reports need to back up to a shared location that auditors can access with their Active Directory logins. Which strategy must the engineer use to meet these objectives? 

A. Use SMB for backups and NFS for reports. 
B. Use NFS for both backups and reports. 
C. Use SMB for both backups and reports. 
D. Use SSH for backups and NFS for reports. 



Question # 8

An engineer wants to perform a packet capture on the Cisco FTD to confirm that the host using IP address 192 168.100.100 has the MAC address of 0042 7734.103 to help troubleshoot a connectivity issue What is the correct tcpdump command syntax to ensure that the MAC address appears in the packet capture output?

A. -nm src 192.168.100.100 
B. -ne src 192.168.100.100 
C. -w capture.pcap -s 1518 host 192.168.100.100 mac
 D. -w capture.pcap -s 1518 host 192.168.100.100 ether 



Question # 9

A network security engineer must export packet captures from the Cisco FMC web browser while troubleshooting an issue. When navigating to the address https:///capture/CAPI/pcap/test.pcap. an error 403: Forbidden is given instead of the PCAP file. Which action must the engineer take to resolve this issue?

A. Disable the HTTPS server and use HTTP instead.
 B. Enable the HTTPS server for the device platform policy. 
C. Disable the proxy setting on the browser. 
D. Use the Cisco FTD IP address as the proxy server setting on the browser. 



Question # 10

An engineer must configure a Cisco FMC dashboard in a multidomain deployment Which action must the engineer take to edit a report template from an ancestor domain? 

A. Add it as a separate widget. 
B. Copy it to the current domain 
C. Assign themselves ownership of it 
D. Change the document attributes. 



Question # 11

An organization is installing a new Cisco FTD appliance in the network. An engineer is tasked with configuring access between two network segments within the same IP subnet. Which step is needed to accomplish this task?

A. Assign an IP address to the Bridge Virtual Interface. 
B. Permit BPDU packets to prevent loops. 
C. Specify a name for the bridge group. 
D. Add a separate bridge group for each segment. 



Question # 12

What must be implemented on Cisco Firepower to allow multiple logical devices on a single physical device to have access to external hosts? 

A. Add at least two container instances from the same module. 
B. Set up a cluster control link between all logical devices 
C. Add one shared management interface on all logical devices. 
D. Define VLAN subinterfaces for each logical device. 



Question # 13

An engineer must configure the firewall to monitor traffic within a single subnet without increasing the hop count of that traffic. How would the engineer achieve this?

A. Configure Cisco Firepower as a transparent firewall 
B. Set up Cisco Firepower as managed by Cisco FDM 
C. Configure Cisco Firepower in FXOS monitor only mode. 
D. Set up Cisco Firepower in intrusion prevention mode