Cisco 350-501 Dumps PDF
Implementing and Operating Cisco Service Provider Network Core Technologies (350-501 SPCOR)- 452 Questions & Answers
- Update Date : July 15, 2024
Master Your Preparation for the Cisco 350-501
We give our customers with the finest 350-501 preparation material available in the form of pdf .Cisco 350-501 exam questions answers are carefully analyzed and crafted with the latest exam patterns by our experts. This steadfast commitment to excellence has built unbreakable trust among countless people who aspire to advance their careers. Our learning resources are designed to help our students attain an impressive score of over 97% in the Cisco 350-501 exam, thanks to our effective study materials. We appreciate your time and investments, ensuring you receive the best resources. Rest assured, we leave no room for error, committed to excellence.
Friendly Support Available 24/7:
If you face issues with our Cisco 350-501 Exam dumps, our customer support specialists are ready to assist you promptly. Your success is our priority, we believe in quality and our customers are our 1st priority. Our team is available 24/7 to offer guidance and support for your Cisco 350-501 exam preparation. Feel free to reach out with any questions if you find any difficulty or confusion. We are committed to ensuring you have the necessary study materials to excel.
Verified and approved Dumps for Cisco 350-501:
Our team of IT experts delivers the most accurate and reliable 350-501 dumps for your Cisco 350-501 exam. All the study material is approved and verified by our team regarding Cisco 350-501 dumps. Our meticulously verified material, endorsed by our IT experts, ensures that you excel with distinction in the 350-501 exam. This top-tier resource, consisting of 350-501 exam questions answers, mirrors the actual exam format, facilitating effective preparation. Our committed team works tirelessly to make sure that our customers can confidently pass their exams on their first attempt, backed by the assurance that our 350-501 dumps are the best and have been thoroughly approved by our experts.
Cisco 350-501 Questions:
Embark on your certification journey with confidence as we are providing most reliable 350-501 dumps from Microsoft. Our commitment to your success comes with a 100% passing guarantee, ensuring that you successfully navigate your Cisco 350-501 exam on your initial attempt. Our dedicated team of seasoned experts has intricately designed our Cisco 350-501 dumps PDF to align seamlessly with the actual exam question answers. Trust our comprehensive 350-501 exam questions answers to be your reliable companion for acing the 350-501 certification.
Cisco 350-501 Sample Questions
Question # 1FRR is configured on a network. What occurs when the headend router on the path is alerted to a link failure over IGP?
A. LSP attempts fast switching on the backup path until the primary path returns to the active state.
B. The headend router uses a presignaled LSP to bypass the failure point.
C. A new backup tunnel is established past the PLR to pass through the protected nodes
D. Backup tunnel is established and intersects with the primary tunnel at the headend.
Question # 2
The service provider is serving hosts with two different multicast streams from source X and source Y. SourceX is multicast group 224.0.0.0/8, and source Y is multicast group 226.0.0.0/8. Multicast source X should sendits stream through bidirectional RP address 10.20.1.1, and multicast source Y should send its stream through RP address 10.20.2.1. Which configuration meets these requirements?
A. Enable ip pim ssm default on RA and RB.
B. Add ip pim bidir-enable in global mode on RB.
C. Permit the source X and source Y IP addresses in the access list on RB.
D. Set PIM sparse mode with a static RP address of 10.20.2.1 on RA and RC.
Question # 3
What Is one of the differences between Ansible and Chef?
A. Ansible uses YAML and Chef uses Ruby.
B. Chef requires the use of Windows in the environment and Ansible requires Linux.
C. Chef is highly scalable and Ansible is highly secure.
D. Ansible uses Ruby and Chef uses Python.
Question # 4
An engineer is moving all of an organization’s Cisco IOS XE BGP routers to the address-family identifier format. Which command should be used to perform this upgrade quickly with the minimum service disruption?
A. vrf upgrade-cli
B. bgp upgrade-cli
C. address-family ipv4
D. ip bgp-community new-format
Question # 5
Which condition must be met for TI-LFA to protect LDP traffic?
A. For single-segment protection, the PQ node must be LDP and SR-capable.
B. The protected destination must have an associated LDP label and prefix-SID.
C. The point of local repair must be LDP-capable.
D. For double-segment protection, the P and Q nodes must be SR-capable.
Question # 6
What is a characteristic of data modeling language?
A. It provides an interface for state data
B. It separates configuration and state data.
C. It ensures devices are individually configured.
D. It replaces SNMP.
Question # 7
What are two features of stateful NAT64? (Choose two.)
A. It uses address overloading.
B. It provides 1:N translations, so it supports an unlimited number of endpoints.
C. It requires IPv4-translatable IPv6 address assignments.
D. It requires the IPv6 hosts to use either DHCPv6-based address assignments or manual address assignments.
E. It provides 1:1 translation, so it supports a limited number of endpoints.
Question # 8
Which technology enables the addition of new wavelengths in a fiber-optic network?
A. IPoDWDM
B. CWDM
C.DWDM
D. ROADM
Question # 9
While an engineer deploys a new Cisco device to redistribute routes from OSPF to BGP, they notice that not all OSPF routes are getting advertised into BGP. Which action must the engineer perform so that the device allows O, OIA, OE1, and OE2 OSPF routes into other protocols?
A. Configure the device to pass only O and E2 routes through it.
B. Configure the synchronization keyword in the global BGP configuration.
C. Configure the keyword nssa in the redistribution entry.
D. Configure the keywords internal and external in the redistribution entry.
Question # 10
A network engineer is implementing NetFlow to observe traffic patterns on the network. The engineer is planning to review the patterns to help plan future strategies for monitoring and preventing congestion as the network grows. If the captures must include BGP next-hop flows, which configuration must the engineer apply to the router?
A. ip cefip flow-export version 5 bgp-nexthopip flow-export destination 192.168.1.1 9995interface gigabitethernet 1/0/1ip flow egress
B. ip cefip flow-export version 9 bgp-nexthopip flow-export destination 192.168.1.1 9996interface gigabitethernet 1/0/1ip flow ingress
C. ip cefip flow-export version 5ip flow-export destination 192.168.1.1 9995interface gigabitethernet 1/0/1ip flow ingresscdp enable
D. no ip cefip flow-export version 9ip flow-export destination 192.168.1.1 9996interface gigabitethernet 1/0/1ip flow ingressip flow egress
Question # 11
What is a characteristic of MVPN?
A. It bypasses the use of MPLS in the service provider core and transmits packets using IP only.
B. It uses pseudowires to route unicast and broadcast traffic over either a service provider MPLS or IP
core.
C. It allows VRF traffic to use the service provider MPLS VPN to route multicast traffic.
D. It creates GRE tunnels to route multicast traffic over a service provider IP core.
Question # 12
A company is expanding its existing office space to a new floor of the building, and the networking team is installing a new set of switches. The new switches are running IGMPv2, and the engineers configured them for VLAN10 only. The rest of the existing network includes numerous Layer 2 switches in multiple other VLANs, all running IGMPv3. Which additional task must the team perform when deploying the new switches so that traffic is switched correctly through the entire network?
A. Configure the new switches to use IGMPv3 on all VLANs on the network.
B. Configure all switches on the network to support IGMPv2 and IGMPv3 on all VLANs on the network.
C. Configure the new switches to use IGMPv3 on VLAN10 only.
D. Configure all switches on the network to support IGMPv2 and IGMPv3 on VLAN10 only.
Question # 13
How does Cisco DNA Center enhance network automation?
A. It allows network administrators to quickly deploy Cisco Layer 2 devices without requiring STP and broadcast transport.
B. It allows network administrators to reduce inconsistencies when they deploy and validate network
configurations.
C. It allows network administrators to reduce the number of VRFs in a multi customer environment by
automatically implementing a single VLAN per customer.
D. It allows network administrators to combine voice and data networks into a single topology without
manual configuration.