CompTIA SK0-005 Exam Questions
CompTIA Server+ Certification Exam- 493 Questions & Answers
- Update Date : July 16, 2026
Master Your Preparation for the CompTIA SK0-005
We give our customers with the finest SK0-005 preparation material available in the form of pdf .CompTIA SK0-005 exam questions answers are carefully analyzed and crafted with the latest exam patterns by our experts. This steadfast commitment to excellence has built unbreakable trust among countless people who aspire to advance their careers. Our learning resources are designed to help our students attain an impressive score of over 97% in the CompTIA SK0-005 exam, thanks to our effective study materials. We appreciate your time and investments, ensuring you receive the best resources. Rest assured, we leave no room for error, committed to excellence.
Friendly Support Available 24/7:
If you face issues with our CompTIA SK0-005 Exam dumps, our customer support specialists are ready to assist you promptly. Your success is our priority, we believe in quality and our customers are our 1st priority. Our team is available 24/7 to offer guidance and support for your CompTIA SK0-005 exam preparation. Feel free to reach out with any questions if you find any difficulty or confusion. We are committed to ensuring you have the necessary study materials to excel.
Verified and approved Dumps for CompTIA SK0-005:
Our team of IT experts delivers the most accurate and reliable SK0-005 dumps for your CompTIA SK0-005 exam. All the study material is approved and verified by our team regarding CompTIA SK0-005 dumps. Our meticulously verified material, endorsed by our IT experts, ensures that you excel with distinction in the SK0-005 exam. This top-tier resource, consisting of SK0-005 exam questions answers, mirrors the actual exam format, facilitating effective preparation. Our committed team works tirelessly to make sure that our customers can confidently pass their exams on their first attempt, backed by the assurance that our SK0-005 dumps are the best and have been thoroughly approved by our experts.
CompTIA SK0-005 Questions:
Embark on your certification journey with confidence as we are providing most reliable SK0-005 dumps from Microsoft. Our commitment to your success comes with a 100% passing guarantee, ensuring that you successfully navigate your CompTIA SK0-005 exam on your initial attempt. Our dedicated team of seasoned experts has intricately designed our CompTIA SK0-005 dumps PDF to align seamlessly with the actual exam question answers. Trust our comprehensive SK0-005 exam questions answers to be your reliable companion for acing the SK0-005 certification.
Related Exams
CompTIA Server+
780 Questions
CompTIA SK0-005 Sample Questions
Question # 1A technician is troubleshooting a database server that has 12 external disk arrays. Multiple disks arein a degraded state. The server is in a remote colocation facility and has on-site support. Thetechnician notices all of the external storage arrays are degraded, but the internal arrays arefunctional. Which of the following steps should the technician take next to quickly address this issue?
A. Notify the users of the downtime and reboot the server from the RDP connection.
B. Notify the management team about the issue and travel to the colocation site with spare disks andRAID controllers.
C. Access the server with RDP and start the RAID utility software to rebuild the arrays.
D. Restore the data for the affected disks and notify the users of the estimated recovery time.
Question # 2
A technician notices a server that contains four fans is now louder than normal even though thetemperature in the room has not changed and the load on the server has not increased. Which of thefollowing is most likely the cause of the noise?
A. Defective fan
B. Change in UEFI
C. Unseated drive
D. Firmware upgrade needed
Question # 3
A recently deployed server is experiencing significant connection issues after being plugged into thenetwork switch. An administrator was asked to review the server configuration and finds thefollowing:10Gb server NIC with 50-micron optic installed10m single-mode fiber patch cable to the switch10Gb switch interface with short-range optic installedWhich of the following steps should the administrator take next?
A. Replace the switch optic with one that supports MMF
B. Replace the server NIC with one compatible with single-mode fiber
C. Replace the optic in the server with a short-range optic
D. Replace the fiber cable with a 32.8ft (10m) OM4 cable
Question # 4
A server administrator needs to ensure proprietary data does not leave the company. Which of thefollowing should the administrator implement to meet this requirement?
A. A review of users' activities
B. File-level monitoring
C. A SIEM solution
D. A DLP policy
Question # 5
Which of the following technologies best describes Hyper-V Replica?
A.High availability
B.VMotion
C.Live migration
D.Disaster recovery
Question # 6
A technician receives reports that a file server is performing slower than usual after a power failure.While investigating the issue, the technician discovers the write cache was disabled. The technicianchecks a server configuration document and confirms the cache was previously enabled. Which ofthe following events most likely caused this change?
A.The cache hit rate was high
B.The volume reached 100% capacity
C.The RAID controller battery failed
D.A drive in the array was replaced
Question # 7
A technician is installing a large number of servers in a data center with limited rack space. Which of the following would accomplish this goal while using the least amount of space?
A.Blade enclosure
B.Rack balancing
C.Rack mount
D.Rail kits
Question # 8
Three new servers that use similar types of resources need to be set up, installed with the same OS,and ready within a short time frame. Which of the following installation types would most likely beused?
A.Physical clones
B.Bare metal
C.Virtualized
D.USB
Question # 9
A technician is configuring a server that will need to accommodate a planned network upgrade. Allhosts will be changed from 10Gb copper to 25Gb fiber. Which of the following would best suit therequirements?
A.FCoE
B.VLAN ID
C.SFP
D.HBA
Question # 10
A technician is configuring a server that will need to accommodate a planned network upgrade.All hosts will be changed from 10Gb copper to 25Gb fiber. Which of the following would best suit the requirements?
A. FCoE
B. VLAN ID
C. SFP
D. HBA
Question # 11
A systems administrator is performing a routine update to a server. The administrator applies theupdate, restarts the server, and then conducts routine testing that reveals the critical functionalityprovided by the server is unavailable. Event logs indicate a core service is failing to start. The serviceis configured to start automatically, and rolling back the update does not correct the issue. Which ofthe following is most likely causing the service failure?
A. The server requires another reboot to complete the rollback.
B. The administrator is not authorized to run the service.
C. The server requires further updates of other software components.
D. The account used to run the service has expired.
Question # 12
A database developer recently requested a 4TB SATA drive utilizing spinning disks be added to anexisting system for a new, heavily used database. The storage administrator turned down the requestafter reviewing it. Which of the following is the most likely reason the administrator did that?
A. The drive is not capable of deduplication.
B. The drive would have slow I/O performance.
C. The drive cannot use NTFS.
D. The drive is not compatible with the server OS.
Question # 13
An administrator is troubleshooting a performance issue with an application. The applicationperforms many small reads and writes in its operation. The administrator determines that theunderlying storage is currently configured to use a general-purpose array with RAID 5. Which of thefollowing should the administrator consider doing in order to offer higher application performanceyet still retain data protection?
A. Move the application to an array using RAID 0.
B. Move the application to an array using RAID 1.
C. Move the application to an array using RAID 6.
D. Move the application to an array using RAID 10.