Cisco 300-410 Dumps PDF

Master Your Preparation for the Cisco 300-410

We give our customers with the finest 300-410 preparation material available in the form of pdf .Cisco 300-410 exam questions answers are carefully analyzed and crafted with the latest exam patterns by our experts. This steadfast commitment to excellence has built unbreakable trust among countless people who aspire to advance their careers. Our learning resources are designed to help our students attain an impressive score of over 97% in the Cisco 300-410 exam, thanks to our effective study materials. We appreciate your time and investments, ensuring you receive the best resources. Rest assured, we leave no room for error, committed to excellence.

Friendly Support Available 24/7:

If you face issues with our Cisco 300-410 Exam dumps, our customer support specialists are ready to assist you promptly. Your success is our priority, we believe in quality and our customers are our 1st priority. Our team is available 24/7 to offer guidance and support for your Cisco 300-410 exam preparation. Feel free to reach out with any questions if you find any difficulty or confusion. We are committed to ensuring you have the necessary study materials to excel.

Verified and approved Dumps for Cisco 300-410:

Our team of IT experts delivers the most accurate and reliable 300-410 dumps for your Cisco 300-410 exam. All the study material is approved and verified by our team regarding Cisco 300-410 dumps. Our meticulously verified material, endorsed by our IT experts, ensures that you excel with distinction in the 300-410 exam. This top-tier resource, consisting of 300-410 exam questions answers, mirrors the actual exam format, facilitating effective preparation. Our committed team works tirelessly to make sure that our customers can confidently pass their exams on their first attempt, backed by the assurance that our 300-410 dumps are the best and have been thoroughly approved by our experts.

Cisco 300-410 Questions:

Embark on your certification journey with confidence as we are providing most reliable 300-410 dumps from Microsoft. Our commitment to your success comes with a 100% passing guarantee, ensuring that you successfully navigate your Cisco 300-410 exam on your initial attempt. Our dedicated team of seasoned experts has intricately designed our Cisco 300-410 dumps PDF to align seamlessly with the actual exam question answers. Trust our comprehensive 300-410 exam questions answers to be your reliable companion for acing the 300-410 certification.

Related Exams

Cisco 300-410 Sample Questions

Question # 1

The network administrator configured CoPP so that all routing protocol traffic toward the router CPU is limited to 1 mbps. All traffic that exceeds this limit must be dropped. The router is running BGP and OSPF Management traffic for Telnet and SSH must be limited to 500kbps.access-list 100 permit tcp any any eq 179access-list 100 permit tcp any any range 22 23access-list 100 permit ospf any any!class-map CM-ROUTINGmatch access-group 100class-map CM-MGMTmatch access-group 100!policy-map PM-COPPclass CM-ROUTINGpolice 1000000 conform-action transmitclass CM-MGMTpolice 500000 conform-action transmit!control-planeservice-policy output PM-COPPNo traffic is filtering through CoPP,which is resulting in high CPU utilization,which configuration resolves the issue ?

A. no access-list 100access-list 100 permit tcp any any eq 179access-list 100 permit ospf any anyaccess-list 101 Permit tcp any any range 22 23!class-map CM-MGMTno match access-group 100match access-group 101
B. control-planeno service-policy output PM-COPPservice-policy input PM-COPP
C. No access-list 100access-list 100 permit tcp any any eq 179access-list 100 permit tcp any any range eq 22access-list 100 permit tcp any any range eq 23access-list 100 permit ospf any any 
D. no access-list 100access-list 100 permit tcp any any eq 179access-list 100 permit ospf any anyaccess-list 101 Permit tcp any any range 22 23!class-map CM-MGMTno match access-group 100match access-group 101!control-planeno service-policy output PM-COPPservice-policy input PM-COPP 

Show Answer

Question # 2

A network administrator is troubleshooting a high utilization issue on the route processor of a router that was reported by NMS The administrator logged into the router to check the control plane policing and observed that the BGP process is dropping a high number of routing packets and causing thousands of routes to recalculate frequently. Which solution resolves this issue?

A. Police the cir for BGP, conform-action transmit, and exceed action transmit.
B. Shape the pir for BGP, conform-action set-prec-transmit, and exceed action set-frdetransmit.
C. Shape the cir for BGP. conform-action transmit, and exceed action transmit.
D. Police the pir for BGP, conform-action set-prec-transmit, and exceed action set-clptransmit. 

Show Answer

Question # 3

What is a function of BFD?

A. peer recovery after a Layer 3 protocol adjacency failure
B. peer recovery after a Layer 2 adjacency failure
C. failure detection independent of routing protocols and media types
D. failure detection dependent on routing protocols and media types 

Show Answer

Question # 4

Which method provides failure detection in BFD?

A. short duration, high overhead
B. short duration, low overhead
C. long duration, high overhead
D. long duration, low overhead 

Show Answer

Question # 5

Which IPv6 feature enables a device to reject traffic when it is originated from an address that is not stored in the device binding table?

A. IPv6 Snooping
B. IPv6 Source Guard
C. IPv6 DAD Proxy
D. IPv6 RA Guard

Show Answer

Question # 6

Which feature minimizes DoS attacks on an IPv6 network?

A. IPv6 Binding Security Table
B. IPv6 Router Advertisement Guard
C. IPv6 Prefix Guard
D. IPv6 Destination Guard 

Show Answer

Question # 7

A newly installed spoke router is configured for DMVPN with the ip mtu 1400 command. Which configuration allows the spoke to use fragmentation with the maximum negotiated TCP MTU over GRE? 

A. ip tcp adjust-mss 1360 crypto ipsec fragmentation after-encryption 
B. ip tcp adjust-mtu 1360 crypto ipsec fragmentation after-encryption 
C. ip tcp adjust-mss 1360 crypto ipsec fragmentation mtu-discovery 
D. ip tcp adjust-mtu 1360 crypto ipsec fragmentation mtu-discovery 

Show Answer

Question # 8

What are two characteristics of IPv6 Source Guard? (Choose two.) 

A. requires IPv6 snooping on Layer 2 access or trunk ports  
B. used in service provider deployments to protect DDoS attacks  
C. requires the user to configure a static binding  
D. requires that validate prefix be enabled  
E. recovers missing binding table entries  

Show Answer

Question # 9

An engineer configured a router with this configuration ip access-hst DENY TELNET 10 deny tcp any any eq 23 log-inputThe router console starts receiving log message :%SEC-6-IPACCESSLOGP: listDENY_TELNET denied tcp 192.168.1.10(1022)(FastEthernet1/0 D508.89gb.003f) - >192.168.2.20(23), 1 packet" Which action stops messages on the console while still denying Telnet?  

A. Configure a 20 permit ip any any command  
B. Remove log-Input keyword from the access list.  
C. Replace log-input keyword with the log keyword in the access list.  
D. Configure a 20 permit ip any any log-input command.  

Show Answer

Question # 10

What must be configured by the network engineer to circumvent AS_PATH prevention mechanism in IP/VPN Hub and Spoke deployment scenarios? 

A. Use allows in and as-override at all Pes.  
B. Use allowas in and as-override at the PE-Hub.  
C. Use Allowas-in the PE_Hub  
D. Use as-override at the PE_Hub  

Show Answer

Question # 11

In a DMVPN network, the Spoke1 user observed that the voice traffic is coming to Spoke2 users via the hub router. Which command is required on both spoke routers to communicate directly to one another? 

A. ip nhrp map dynamic  
B. ip nhrp shortcut  
C. ip nhrp nhs multicast  
D. ip nhrp redirect  

Show Answer

Question # 12

Which IPv6 first hop security feature controls the traffic necessary for proper discovery of neighbor device operation and performance? 

A. RA Throttling  
B. Source or Destination Guard  
C. ND Multicast Suppression  
D. IPv6 Snooping  

Show Answer

Question # 13

What are the two goals of micro BFD sessions? (Choose two.) 

A. The high bandwidth member link of a link aggregation group must run BFD  
B. Run the BFD session with 3x3 ms hello timer  
C. Continuity for each member link of a link aggregation group must be verified  
D. Eny member link on a link aggregation group must run BFD  
E. Each member link of a link aggregation group must run BFD.  

Show Answer