Cisco 300-420 Dumps

Cisco 300-420 Dumps PDF

Designing Cisco Enterprise Networks (ENSLD)
  • 226 Questions & Answers
  • Update Date : June 05, 2024

PDF + Testing Engine
$68.5
Testing Engine (only)
$56.5
PDF (only)
$45
Free Sample Questions

Master Your Preparation for the Cisco 300-420

We give our customers with the finest 300-420 preparation material available in the form of pdf .Cisco 300-420 exam questions answers are carefully analyzed and crafted with the latest exam patterns by our experts. This steadfast commitment to excellence has built unbreakable trust among countless people who aspire to advance their careers. Our learning resources are designed to help our students attain an impressive score of over 97% in the Cisco 300-420 exam, thanks to our effective study materials. We appreciate your time and investments, ensuring you receive the best resources. Rest assured, we leave no room for error, committed to excellence.

Friendly Support Available 24/7:

If you face issues with our Cisco 300-420 Exam dumps, our customer support specialists are ready to assist you promptly. Your success is our priority, we believe in quality and our customers are our 1st priority. Our team is available 24/7 to offer guidance and support for your Cisco 300-420 exam preparation. Feel free to reach out with any questions if you find any difficulty or confusion. We are committed to ensuring you have the necessary study materials to excel.

Verified and approved Dumps for Cisco 300-420:

Our team of IT experts delivers the most accurate and reliable 300-420 dumps for your Cisco 300-420 exam. All the study material is approved and verified by our team regarding Cisco 300-420 dumps. Our meticulously verified material, endorsed by our IT experts, ensures that you excel with distinction in the 300-420 exam. This top-tier resource, consisting of 300-420 exam questions answers, mirrors the actual exam format, facilitating effective preparation. Our committed team works tirelessly to make sure that our customers can confidently pass their exams on their first attempt, backed by the assurance that our 300-420 dumps are the best and have been thoroughly approved by our experts.

Cisco 300-420 Questions:

Embark on your certification journey with confidence as we are providing most reliable 300-420 dumps from Microsoft. Our commitment to your success comes with a 100% passing guarantee, ensuring that you successfully navigate your Cisco 300-420 exam on your initial attempt. Our dedicated team of seasoned experts has intricately designed our Cisco 300-420 dumps PDF to align seamlessly with the actual exam question answers. Trust our comprehensive 300-420 exam questions answers to be your reliable companion for acing the 300-420 certification.

Related Exams


Cisco 300-420 Sample Questions

Question # 1

Which protocol is deployed through LAN automation to build node-to-node underlay adjacencies in SDA?

A. IS-IS
B. OLISP
C. OSPF
D. VXLAN



Question # 2

Prior to establishing full-mesh iPsec tunnels in a typical Cisco SD-WAN deployment, which mechanism do WAN Edge routers use to exchange Key information for data plane encryption?

A. They use vSmart controllers as key exchange servers.
B. They use vManage as a key exchange server.
C. They use IKEv2 when exchanging keys with each other.
D. They use vBond as a key exchange server.



Question # 3

How do IETF. OpenConfig and Cisco nativo YANG models differ when used to configuro the same feature on an infrastructure device?

A. OpenConfig models are more comprehensive than IETF.
B. Cisco native models are less comprehensive than OpenConfig.
C. Cisco native models are less comprehensive than IETF.
D. IETF models are more comprehensive than OpenConfig.



Question # 4

An engineer is designing a PIM Anycast RP solution between two data centers. The design must ensure that RP1 in DC1 and RP2 in DC2 inform each other about specific sources that have joined locally. Which solution must the engineer choose?

A. Provision the RPs on the same IP subnet and extend the subnet at Layer 2 between data centers
B. Enable MSDP between RPs using separate unique loopback interfaces
C. Enable MSDP between RPs using the configured Anycast RP address
D. No action is required because PIM registers from the source will, by default, reach each RP



Question # 5

Which control plane protocol is responsible for ElD-to-RLOC mapping concerning SO-Access Architecture?

A. GBAC
B. LISP
C. CEF
D. VXLAN



Question # 6

In a multicast network, which condition must be met for an RPF check to be performed on the RP address'?

A. The PIM DM device receives a multicast packet and has no directly connected members
B. The PIM router or multilayer switch has a shared-tree state
C. The PIM router or multilayer switch has a source-tree state
D. The PIM DM device receives a multicast packet and has no directly connected PIM neighbor



Question # 7

An engineer is designing a campus network with Cisco Catalyst 95CO switches in the aggression layer. The design requires running nonblocking Layer 2 MEC from the aggregation layer to the access layer. The Catalyst switches are located on different campus floors for availability reasons, and each access switch veil contam a single VLAN. Which technology must the engineer choose for the aggregation switches in the design? 

A. VPC
B. VSS
C. StackWise Virtual
D. StackWise-180



Question # 8

Which type of rendezvous point deployment is standards-based and supports dynamic RP discovery?

A. bootstrap router
B. Anycast-RP
C. Auto-RP
D. static RP



Question # 9

An engineer is designing a WAN solution for a customer with teams in different branch locations that need to communicate The teams also need to access enterprise applications hosted in the data center and the cloud The customer also must provide guests with connectivity to the internet only, and the internet gateway is located in the data center Which solution must the engineer choose?

A. WAN connectivity from a different service provider for guests
B. firewall placed in data center that fitters any traffic from guests
C. MPLS Layer 3 VPN with one VRF for corporate access and a separate VRF for guests
D. MPLS Layer 3 VPN with a separate VRF for each branch location



Question # 10

A network engineer must optimize a campus OSPF deployment Currently each time a type 1 or type 2 LSA is generated within an area, the OSPF process must recompute the entire SPT Which solution improves the recomputation process?

A. iSPF
B. BFD
C. SPF
D. PRC



Question # 11

A company needs to increase access port capacity on one floor of a building. They want to leverage the existing catalyst access switch. There is no problem with uplink bandwidth capacity. However, no additional uplinks can be added because no ports are available on the distribution switches. Which solution must the company choose to provide additional access ports?

A. VDC
B. VSS
C. Etherchannel
D. Stackwise



Question # 12

Which information update is carried by OMP and enables the Cisco SD-WAN to build a secure overlay fabric on top of any public or private transport without regard for the actual link IP?

A. TLOC
B. RLOC
C. LISP PITR
D. DTLS



Question # 13

Since installing a cisco TelePresence system, the company is experiencing other application having response issues when the system in use. As a result, the company asked an architect to recommend a QoS solution. The customer is currently using a CBWFQ policy to manage traffic on an internet connection with a speed of 100 Mbps. Which link-capacity limit must the architect choose for strict-priority for the real-time traffic?

A. 25 Mbps
B. 50 Mbps
C. 33 Mbps
D. 75 Mbps